| Low water flow | ||
| Probable Cause #1 | Dirty Filter | |
| Action | Remove filter cartridge and clean. | |
| Probable Cause #2 | Closed gate valves or blocked lines. | |
| Action | Open all gate valves. | |
| Probable Cause #3 | Low voltage or incorrect voltage. | |
| Action | Have a licensed electrician check the line voltage. | |
| Spa is leaking | ||
| Probable Cause #1 | Loose connection. | |
| Action | Hand tighten all disconnects and fittings. Check joints and unions. | |
| Motor does not run | ||
| Probable Cause #1 | No power to motor. | |
| Action | Check power switches and circuit breakers. Check motor plug where plugged into control panel. | |
| Probable Cause #2 | Pump jammed by foreign matter in impeller. | |
| Action | Call dealer for recommended action. | |
| Probable Cause #3 | Motor overheats during hot days while filtering. | |
| Action | Reprogram your controls to cycle during the coolest parts of the day and on shorter cycles. (see programming instructions in manual) | |
| Motor runs hot | ||
| Probable Cause #1 | Pump ran dry. | |
| Action | Call dealer for recommended action. | |
| Probable Cause #2 | Restricted suction lines. | |
| Action | Make sure all valves are open/clear suction of debris. | |
